High Resistant FTTx Enclosure with ODC Connector, PTLC Connector
FTTX Enclosure is a new economic fiber distributed solution for outdoor use. Compare traditional products, FTTX Enclosure is easy to operate and has high compatibility. It can be used for wall-mounting, aerial installation or holding pole installation, based on different situation. FTTX Enclosure not only used in FTTH field, but also used in FTTA or other harsh environment.
Trunk Cable Connecting Trunk cable needs to be fusion welded frequently because of each drum cable length limited. So connecting point is weak and need to be protected very well. When trunk cable comes into FTTX Enclosure, it will be sealed and fixed by torsion proof cable gland (plastic or metal type). For 5mm-14mm out diameter cable, FTTX Enclosure has different accessories to fit. Torsion gland can release stress when trunk cable bending and protect fiber avoid breaking. Inside of the FTTX Enclosure, main cable and strength member were fixed by fastener, which make sure the box can stand 1200N pulling force long term. Splice protection sleeve (Max. 24pcs) and PLC (Max.2pcs) can be fixed on the body, which make FTTX Enclosure fiber divided very easy. Anti-skid design on the base case, which makes sure FTTX Enclosure holds wire/pole firmly.
Prospecting or Military Communication. The cable will be replayed frequently, when prospecting or military communication. Normal connector and cable cannot stand frequently and high strength pulling and reuse. Inside of the FTTX Enclosure, armored cable and strength member were fixed by fastener, which make sure the box can stand 1200N pulling force long term. It’s very suitable for field use, especially in star network communications. High strength material and arc interface design make sure FTTX Enclosure work abnormally when suffer shocks.
Specifications
IP68 Water immersion and Dust protection for harsh environment
Wide range of operational temperature for outside plant -40/+70
Chemical Resistance
Simple assembly requiring no special tools
Wall-mounting, aerial installation or holding pole installation
Technical Data
| Dimensions (LxWxH) | 365x137x90mm(Without cover) 375x142x120mm(With cover) |
| Ingress protection | IP67 |
| Temperature range | -40~80℃ |
| Cable strength member | Armored or Non-armored |
| Cable type | Hybrid or non-hybrid |
| Round cable OD | 5.0mm to 14.0mm |
| Flat cable dimension | 4.6x8.9mm |
| Cable jacket material | LSZH, PE or TPU |
| Bending Radius | 20D |
| Cable crush resistance | 200N/cm long term |
| Tensile strength | 1200N long term |
| Fire protection rating | UL94-V0 |
| Number of PLC | 1 to 2pcs |
| Number of fusion protection sleeve | 1 to 24pcs |
Fiber Optic Patch Cord, Optical Fiber Patch Cord, Fiber Optic Assemblies, Fiber Jumpers
Product Tags:
|
|
High Resistant Network Termination Box FTTx Enclosure With ODC / PTLC Connector Images
|
